CATIA Prismatic Machining Expert Pdf Book

Welcome to the Prismatic Machining Expert Lesson!
 This guide is intended to help you get familiar with the Prismatic Machining product. It has been designed to show you how to Identify and use the Prismatic Machining workbench tools.How to Define Prismatic Machining operations (2.5 Axis Milling) in CATIA V5. How to Create Prismatic Machining Area and Rework Area in addition of Defining and modifying NC Macros.
Targeted audience CATIA V5 Mechanical Designers,NC Programmers
Students attending this course should have knowledge of CATIA V5 Fundamentals and Numerical Control Infrastructure workbench.

 

Table of Contents

  • Introduction to Prismatic Machining
  • How to Access the Prismatic Machining Workbench
  • Workbench User Interface
  • How to Create a Milling Operation
  •  Facing Operation: Introduction
  • Creating a Facing Operation
  • General Process
  • Facing Operation Strategy
  • Facing Operation Geometry
  • How to Select/Create a Tool
  • General Process to Select Feeds and Speeds
  • Pocketing Operation: Introduction
  • Creating a Pocketing Operation: General Process
  • Pocketing Operation: Strategy
  • Pocketing Operation: Geometry
  • Pocketing Operation: Feeds and Speeds
  • Pocketing Operation: Dedicated Approach Macro
  •  4-Axis Pocketing Operation: Introduction
  • Creating a 4-Axis Pocketing Operation: General Process
  • 4-Axis Pocketing Operation: Strategy
  • 4-Axis Pocketing Operation: Geometry
  • 4-Axis Pocketing Operation: Macros
  • Prismatic Roughing Operation: Introduction
  • 60 Creating a Prismatic Roughing Operation: General 
  • Prismatic Roughing Operation: Strategy
  • Prismatic Roughing Operation: Geometry
  • Prismatic Roughing Operation: Macro
  • Plunge Milling: Introduction
  • Plunge Milling: Strategy
  • Plunge Milling: Geometry
  • Plunge Milling: Tools
  • Plunge Milling: Feeds and Speeds Plunge Milling: Macro
  • Profile Contouring Operation: Introduction
  • Creating a Profile Contouring Operation: General Process
  • Profile Contouring Operation: Strategy
  • Profile Contouring Operation: Geometry
  • Profile Contouring Operation: Feeds and Speeds
     
  • Groove Milling Operation: Introduction
  • Creating a Groove Milling Operation: General Process
  • Groove Milling Operation: Strategy
  • Groove Milling Operation: Geometry
  • Groove Milling Operation: Too
  • Point To Point Operation: Introduction
  • Creating a Point To Point Operation: General Process
  • Point To Point Operation: Strategy
  • Curve Following Operation: Introduction
  • Creating a Curve Following Operation: General Process
  • Curve Following Operation: Strategy
  • Curve Following Operation: Geometry
  • Sequential Operations: Introduction
  • Creating a Sequential Operation: General Process
  • Sequential Axial Operation: Strategy
  • Sequential Axial Operation: Geometry
  • Sequential Groove Operation: Strategy
  • Sequential Groove Operation: Geometry
  • Sequential Operations: Tools
  • Sequential Operations: Feeds and Speeds
  • Sequential Operations: Macros
  • Prismatic Rework Area: Introduction
  • Creating a Prismatic Rework Area: General Process
  • Creating Prismatic Rework Area with Pocketing
  • Creating Prismatic Rework Area with Profile Contouring
  • Prismatic Machining Area: Introduction
  • Creating Prismatic Machining Area with Pocket Type
  • Using Prismatic Machining Area for a Pocketing Operation
  • Creating Prismatic Machining Area with Contour Type
  • Using Prismatic Machining Area for a Profile Contouring Operations
  • Using Prismatic Machining Area for Machining Processes 
  • NC Macro: Introduction
  • Types of Macro
  • Details of a Clearance Macro
  • Pre-defined Macros
  • Build by User macros Tool Box
  • Actions on your Macro
  • How to modify Parameters on Macro
  • Creating Your Own Macro with Cutter Compensation